Hebei Macrokun Trading Co., Ltd.  

Product Name: Tetko Mat Screen Tension Meter Screen Tensiometer Model NO.: TETKO mat Category: Tension Control System Trademark: TETKO mat Transport Package: Export Packing Product Description Screen TensiometerModel: TETKO MATThe TETKO screen tension meter has been calibrated to zero before leaving the factory. Users do not need to adjust it by themselves.The tension of the net is expressed in N / cm, which indicates how much the tensile force of the mesh yarn per cm width is usually expressed in N-Newton or Kg-kg. Newton shows the actual meaning of the tensiometer; the reading display method: The first reading of the tensiometer reading is incorrect. The second reading of the tensiometer is normal and the tensiometer should be flicked. Mesh next to it.PRODUCT PARAMETERSMeasuring Principle:Instrument for measuring screen tension with precision mechanical methodDisplay Error:Accuracy error is ± 5%Measuring Range:7-50N/cm 7-80N/cmPackage Size:229*200*76mmAccessories:Standard calibration glassNet Size:108*76*44mmNet Weight:about 500 gUnits Of Measurement:N/cmTotal Weight:about 1000gNote:Shockproof, put it on its side after useType of meshTy pes of printingTension IN / CMUltra high tension meshCircuit board and measuring scale16-20High-strength meshMulti-color four-color overprinting machine printing16-20High precision ultrafine meshHigh-precision multilayer circuit printing25-30High-precision polyester mesh standard monofilamentMulti-color and four-color overprint8-12Ordinary polyester mesh standard monofilamentFlat objects8-12OUR PRODUCTScreen tension meterCommon phenomena are printing ghosting, inaccurate color registration, ink smearing, etc., which is the expression of uneven tension.Therefore, the tension meter is an important tool for you to make color plates, precision plates, and dot plates.Tensiometer is used to measure the tension of the stretched mesh, and is an indispensable tension measurer in the stretched net process.Selecting a high-precision tensioner is the key to plate making and overprinting.The tensiometer is easy to operate and easy to read. The error is small and the accuracy is high.The tensiometer is an instrument that measures the amount of mutual traction between the inside of the wire mesh and the fixed wire mesh contact when the wire mesh is under tension. The unit for measuring tension is expressed in Newtons / cm.Tension can also be expressed in relative values.The centimeter tensiometer is a kind of relative tension, which is calculated by the value of the depth of the tensiometer to sink the wire mesh (mm). The tension value can be obtained directly from the indicator panel or indirectly from the control panel. get. Tensiometer is an important testing instrument to check the quality of screen printing plate. In order to ensure the tension required by the plate making, the tension meter should be used during or after the stretching.Reading display mode: the first reading of the tensiometer reading pointer is incorrect, the second reading of the tensiometer rotation is normal, and the net yarn beside the tensiometer must be shaken.Tensiometer Accessories1. Scale fixing screw2. Zero adjustment disc3.0 N / cm (zero point)4. base of tension meter5. Glass calibration block6. The contact surface of the mesh during the testMeasurement Methods And StepsZero AdjustmentRemove the tensiometer from the box, place it on the glass calibration block, and then turn the fixing screw counterclockwise to allow the zeroing dial to rotate. Rotate the zero plate to zero and /confirm/i.MeasuringFlip mesh and place it horizontally (PCB contact side up) place the tensiometer at the four corners and center of the screen, check the tension value at each point, and record the minimum value. Check whether the screen tension test value is within the allowable range, if the measured value does not meet the standard, please feedback to the engineer for processing.After the measurement, put the tensiometer back into the box in time, and then put it back on the knife holder.