Hebei Macrokun Trading Co., Ltd.  

Product Name: Red Tension Meter Screen Tensiometer Model NO.: MK-RTM Category: Tension Control System Trademark: MACROKUN Transport Package: Export Packing Specification: 0-50N/cm Origin: China Product Description Screen Tensiometer1.The tension meter has been calibrated to zero before leaving the factory, and users should not adjust it by themselves.2.Reading method: The reading of the second rotation of the tensiometer pointer is accurate (and the mesh next to the tension meter should be lightly slid).PRODUCT PARAMETERSType of meshTy pes of printingTension IN / CMUltra high tension meshCircuit board and measuring scale16-20High-strength meshMulti-color four-color overprinting machine printing16-20High precision ultrafine meshHigh-precision multilayer circuit printing25-30High-precision polyester mesh standard monofilamentMulti-color and four-color overprint8-12Ordinary polyester mesh standard monofilamentFlat objects8-12Commonly used mesh maximum bearing tensionThe data in the table was tested based on Swiss medium and thick yarn, specifically tension is relatedto the quality of mesh stretching machine, with good quality mesh stretching machine, the mesh yarn can reach the highest tension and not broken. However, if the mesh yarn is beyond the maximum withstand tension, its easily broken. Please kindly refer to below data:Mesh/inchMesh/cmwithstand the highest tensionAdjust air pressure77T200mesh30N/cm7kg/cm90T230mesh25N/cm6.5kg/cm100T250mesh23N/cm6kg/cm120T305mesh21N/cm5.7kg/cm140T355mesh20N/cm5.3kg/cm165T420mesh18N/cm5kg/cmOUR PRODUCTTensiometer is used to measure the tension of the stretched mesh, and is an indispensable tension measurer in the stretched net process.Selecting a high-precision tensioner is the key to plate making and overprinting.The tensiometer is easy to operate and easy to read. The error is small and the accuracy is high.The tensiometer is an instrument that measures the amount of mutual traction between the inside of the wire mesh and the fixed wire mesh contact when the wire mesh is under tension. The unit for measuring tension is expressed in Newtons / cm.Tension can also be expressed in relative values.The centimeter tensiometer is a kind of relative tension, which is calculated by the value of the depth of the tensiometer to sink the wire mesh (mm). The tension value can be obtained directly from the indicator panel or indirectly from the control panel. get. Tensiometer is an important testing instrument to check the quality of screen printing plate. In order to ensure the tension required by the plate making, the tension meter should be used during or after the stretching. Reading display mode: the first reading of the tensiometer reading pointer is incorrect, the second reading of the tensiometer rotation is normal, and the net yarn beside the tensiometer must be shaken.Feature:1. This product is a portable, compact, mechanical tension measuring device for accurate and consistent measurement of all screen printing fabrics in Newtons per centimeter (N/cm).2. It consists of a shock-resistant measuring base with a precision mechanical dial indicator. it works on the principle of force deflection; the unique design of the meters 3-point measuring base permits accurate measurement on the screen (polyester, nylon or wire), independent of the screen frame or stretching device. 3. Substantial improvement in tension measuring methods as compared to touch control, gauging by percentage of fabric elongation, and air pressure values.4. Accurate tension measurements will improve registration and reduce rejects, resulting in increased productivity.5.Reproducible and uniform tension measurement, screen after screen.Tensiometer AccessoriesNote: The tension of the mesh is N/cm, which means how much tension the mesh has in the width per cm (usually expressed in N-Newton or Kg-kg, 1 kg = 9.8 Newton).So Newton shows that the tension meter has The actual number of tensions.Measurement Methods And StepsZero AdjustmentRemove the tensiometer from the box, place it on the glass calibration block, and then turn the fixing screw counterclockwise to allow the zeroing dial to rotate. Rotate the zero plate to zero and /confirm/i.MeasuringFlip mesh and place it horizontally (PCB contact side up) place the tensiometer at the four corners and center of the screen, check the tension value at each point, and record the minimum value. Check whether the screen tension test value is within the allowable range, if the measured value does not meet the standard, please feedback to the engineer for processing.After the measurement, put the tensiometer back into the box in time, and then put it back on the knife holder.Measurement Methods And Steps